Bugatti Centodieci revealed – a homage to the EB110

Limited-build Centodieci to channel its ’90s predecessor for ten wealthy owners

Bugatti has officially taken the covers off its latest low-volume hypercar, which this time has taken inspiration from an iconic model from the firm’s recent past. Called the Bugatti Centodieci, this limited-build model has been designed and developed in homage to the EB110, something reflected not only by its quasi-retro design, but also its designation. 

Like the Divo and La Voiture Noire that came before, the Centodieci utilises the basic underpinnings of a Chiron, if you could ever call them basic. As a result, the Centodieci features a carbonfibre monocoque that stops beyond the cabin to then connect to a subframe supporting the vast 8-litre W16 powertrain

That powertrain is largely the same as the one found in a Chiron too, but has been fettled by Bugatti’s engineers to produce 1577bhp at 7000rpm – 98bhp more than standard. Performance figures are typically impressive, the car reaching 100kph in 2.4sec, 200kph in 6.1sec and 300kph in 13.1sec. The Centodieci’s top speed has been limited to 378kph, but unlike the Chiron and Veyron which were both engineered chiefly as high-speed record breakers, the Centodieci is more about its design, and the not-so-subtle connection to its EB110 predecessor.

Aside from its clear proportional correlation to the Chiron, the Centodieci diverges from Bugatti’s curvaceous yet ornate aesthetic, instead referencing the EB110’s blockier ’90s look. The wraparound front windscreen is the most obvious change up front, which combined with a streamlined take on the EB110’s vented headlights and small, horseshoe grille make for quite a distinct look compared to Bugatti’s recent models.

The Centodieci’s most obvious nod to the EB110, and specifically the 1992 Super Sport derivative, is the five port holes just behind the rear quarter windows which replace Bugatti’s usual C element, whether the full depth of the body as on the Chiron, or halfway down as on the Divo.

The rear end is defined by the high-set tail lights and static rear wing, that both sit above a tall rear diffuser and vented grille, helping disperse the significant heat generated by the W16 engine.

Only ten will be built, at Bugatti’s Molsheim factory, for a cool $8.83m before local taxes. All versions have been sold though, and are able to be specified to each owner’s specific designation, whether that be a solid colour like on the show car or one based on a historic livery from Bugatti’s past.

This article originally appeared at evo.co.uk

Copyright © evo UK, Dennis Publishing

Categories: Road

,,,

Leave A Reply

Your email address will not be published.